Binding machine can often be used in our daily life, used for packing cartons, cloth packages, etc., which brings convenience to production and has won everyone's love. So do you know what operating specifications the binding machine has? Next, let's take a look!

Because of its convenient and practical characteristics, the binding machine can be used in many kinds of processing production. Before using, the machine should be checked for faults, and then it can be used normally. It is forbidden to stand or pile up any objects under the film system. The rotary table of the strapping machine should run clockwise. Check whether the solid of unmanned baler is firm and loose. Fill the reducer with liquid lubricating oil regularly, and observe whether the oil circuit is smooth.

Do not test the voltage between the DC motor control board and the input point of PLC and the ground wire. It is necessary to firmly ground or zero, so as to avoid damage to machines and personnel caused by electric leakage. Check whether the motor and electrical equipment are dry and the insulation is good. Check and maintain the electrical and electrical connections and clean electrical cabinets regularly. It is forbidden to move or dismantle the upper and lower fixed limit blocks, and make the external power supply meet the power supply requirements of the machine. When in use, connect the power plug to the power supply, press the switch, and the indicator lights up. When the two proximity switches sense the tape feeding probe shown, the main motor starts and the machine starts to feed the tape.

In the process of operation, do not put your hand near the chain for maintenance or inspection, or do other operations to prevent hand injury. If there is any problem, you should turn off the power supply in time for maintenance. When the strapping machine is running, the operator should stand at a certain distance from the turntable. When a working process of the machine is finished and stopped, the operator should approach the machine again to prevent the goods from scattering and hurting people. When the strapping machine moves away from the original position, the professional should reinstall and test the machine, and make sure it is correct before using it. Turn off the power switch or motor switch after each use. Maintain the equipment regularly.

The above is the operation specification of the strapping machine. I hope the above content can be helpful to you. Welcome to inquire!