The development of rope making machine will bring a lot of convenience to people's life. Rope is an essential thing in people's life. So how to operate?

The first step is to put it on the horizontal ground, connect the power supply, check whether the transmission is normal, and lubricate the transmission parts appropriately. Start the motor to see if the running direction is consistent with the indicated direction. If not, turn off the power supply and exchange the two wires between the capacitor and the motor to be consistent with the indicated direction.

The second step is to insert an appropriate amount of the prepared straw into the two feeding ports of the machine, and then put it between the two pullers through the rope mouth.

In the third step, after the power is turned on, the original straw is continuously input to complete the production.

Step 4: when the rope coil is full, turn off the power supply of the rope making machine, cut off the straw rope near the wooden plate, take off the wooden plate, take off the straw rope bundle, after installing the rope coil, wind the original rope head on the wooden plate and then re produce.

Precautions for using rope making machine:

1. The equipment must be operated and maintained by special personnel. Before working, the operators should read the operation manual carefully and be familiar with the performance and precautions.

2. Adjust the height of the worktable and the pressure bar according to the thickness and cutting amount of the workpiece to be processed.

3. Observe the working condition of the machine tool every time it is started, and pay attention to stop the work before terminating the vacuum work.

4. In order to facilitate maintenance and adjustment and improve work efficiency, the machine is equipped with manual and automatic working conditions.

5. Regularly lubricate and maintain the machine tool according to certain requirements.