Equipment operation is a link that cannot be ignored in the production of enterprises, and high-speed knitting machines should also strictly follow the specifications during operation:
This equipment is suitable for metal shielding braiding of wires and cables, and is mainly composed of pay-off racks, wire wheels, composite braiding machines, traction wheels, wire take-up devices and motors. The equipment is grounded firmly and reliably. The temperature of grease and oil on the surface of the wire rope rises to the specified degree of expression. Pay attention to the grease on the surface of the wire rope at any time to ensure that the surface of the wire rope is immersed in an appropriate and even oil. If an abnormal phenomenon is found and abnormal sound is heard, it should be stopped for inspection immediately and dealt with. If it cannot be handled, it should be reported to the person in charge of the production of the knitting machine in time. If the person in charge cannot handle it, the person in charge should report to the factory leader.
Do not touch the rotating parts of the machine with your hands and other objects while the machine is in operation, and do not allow your body to lean against the equipment. If the machine is abnormal or an accident occurs during production, stop immediately for processing. Do not put tools and sundries on the equipment, do not place objects near the equipment, and keep the passage unobstructed. Wire reels and waste wires should be placed in designated places. Check and make sure that the anti-rotation guide plate of the wire reel bracket is not deformed and the pin of the guide wheel is not abnormal. When installing the thread, check to make sure that the right and left twist direction and quantity of the strandless thread are wrong. If it is found that the lubrication system is not normally supplied with oil, it should be shut down immediately, and those who cannot handle it should be reported to the person in charge of the braiding machine.
The glass fiber braiding machine puts the braided copper wire on the braiding spindle according to the number of strands required by the process, and then installs the spindles on the braiding machine in turn, and places the tension adjustment weight according to the size of the braided copper wire and the number of strands, and turns each strand in turn The braided copper wire is pulled to the front of the wire mold through the threading hole, the tension hammer and the broken wire clamp. Pay attention to the clearance fit between the wire frame and the stator at all times during operation. If it is loose, it should be tightened at any time to prevent accidents. The torque motor control should be adjusted in time during the process of winding and winding. After the operation is over, the power should be turned off. Do a good job of machine maintenance and cleaning. In the event of an injury, the injured should be rescued and reported to the unit leader in time to protect the scene of the accident.
Production is the top priority of an enterprise's production. The production and operation of knitting machines are relatively complicated compared to other equipment, but production management cannot be ignored.
